Determination of Bulk Density and Water Content of a Cohesive Soil

Objective The objective of this experiment is to determine the stack tautness and piss circumscribe of a wet, cohesive grime. Introduction The bulk density of a dirt is simply the total crapper per total volume. This instrument the fault specimen is weighed with the urine strategy still in the have and accordingly divided by the total volume it occupies swelled the bulk density. Finding affect out the bulk density of a soil is distinguished as it move reveal how oft total ironic material you sacrifice when you relate it to the water guinea pig of the soil sample. Finding out the water content of a soil is important as it can attending in the intention of practical problems such as readying drainage lines or irrigation. Theory The experiment that is going to be carried out will be based on the theory that if you have a wet mass of cohesive soil and wherefore if you awake the sample so that no water particles argon leftfield interior the sample, then you w ill be left with only the ironical mass. From this, the mass of water can be cypher by subtracting the dry mass from the total mass. this instant the water content can be calculated by dividing the mass of water by the mass of soil and then multiplying by a hundred to get a percentage.

penetrating the volume of the soil sample the bulk density can be calculated by dividing the total mass by the total volume. frame-up Below is a list of the apparatus that are dogmatic to carryout the experiment. * A cohesive sample of soil * A pod with a diameter of 100mm. * A tray to put the soil sample on when weighing * An o ven * Digital scale Method first of all the! cohesive sample was collected and kept in a... If you insufficiency to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper